Irene Roundhouse

Checklist Roundhouse parts for IRENE

0-4-0 Chassis kit for Billy, Katie and George (HBK1)
Katie body kit (HBK17)
Katie smoke box with fittings, do not solder door (CSB Katie, do not solder door)
Safety valve (5/16"*32ME) (SV)
Safety valve filler plug only with 'O' ring (SVFP)
Pressure gauge without red marking at 40psi (PG without red marking)
Lubricator cap with 'O' ring (LUBCAP)
Lubricator drain screw with 'O' ring (LDS)
1 Boilerband with screws and nuts (EBB, suitable for Katie)
Katie brass boiler wrapper with screw and nuts (wrapper Katie)

These parts can be ordered directly at Roundhouse for about £932 (www.Roundhouse-eng.co.uk).
Or copy the list above in a mail to Roundhouse (mail@Roundhouse-eng.com).
More info on the smoke box: see FAQs on smoke box. And on the pressure gauge: see FAQs on pressure gauge.

If you build Irene manual you need to order in addition a Roundhouse regulator handle:

Regulator-Manual handle only (REGH)

Optional Roundhouse parts can be fitted as well:

Cylinder cladding
Buffer beam overlays Katie
A combination lever & crosshead set for 'classic series' locomotives.

Tender:

Four wheeled tender kit as George (state gauge required when ordering, HBK7)

Useful Roundhouse parts:

Spare safety valve (5/16"*32ME) (SV) with some extra 'O' rings as used inside the safety valve
Boiler blanking plug + 'O' ring (5/16"*32ME) (BLP), see general FAQs: how connect to a compressor for testing?
Center Buffer Roundhouse (pair) (CCBR), see general FAQs: how to couple LGB rolling stock?