Weisshorn Roundhouse parts

Checklist Roundhouse parts for Weisshorn (final list)

3 Dummy Whistles with M2 screw fitted (BDW)
1 Axle crank assembly (ACA)
1 Axle crank assembly with plain crank pins fitted (ACA cranc pins fitted)
2 Roll pins
2 1/4 " bore steel washers
4 Flanged driving wheels 42mm insulated with grub screws (WD42)
1 Axle bushes (pack of 4) (AB4)
1 Pair of centre buffers Roundhouse (CCBR)
1 Wheel set 24.5mm as Fowler tender for 45 gauge
1 Pair of Cylinders, front cover, piston assembly, slide bar and exhaust pipes fitted (C)
4 Bolts with washers for pair of cylinders
1 Pair of weigh shaft brackets (penguins) (WSB)
1 Pair of expansion links + bushes & nuts (EL+B)
2 Starlock washers
2 Return Cranks with screws & nuts (RC)
2 Radius rods (CR)
1 Lifting arm with grub screw (left side) (CLAL)
1 Lifting arm with grub screw (right side) (CLAR)
1 Weigh shaft (WSH Katie)
2 Lifting links (LL)
4 M2 steel screws & nuts
2 Packs of 6 short crank pins (CPS6)
14 5BA steel washers
1 Billy smokebox dart (CSBD Billy)
1 Pack of 10 handrail knobs with 8BA nuts (HK10)
1 Safety valve (5/16"*32ME) (SV)
1 Pressure gauge without red marking at 40psi (PG without red marking)
1 Lubricator cap with 'O' ring (LUBCAP)
1 Lubricator drain screw with 'O' ring (LDS)
1 Pair of crosshead + combination lever for 'classic series' locomotives (CLCH)

These parts can be ordered directly at Roundhouse for about £564 (www.Roundhouse-eng.co.uk).
Or copy the list above in a mail to Roundhouse (mail@Roundhouse-eng.com).
More info on the pressure gauge: see FAQs on pressure gauge.

If you build the Weisshorn manual you need to order in addition to the Riverdale Weisshorn manual kit, a Roundhouse reversing lever:

Reversing lever (RL)

If you want to run the Weisshorn on 32mm gauge please contact us for details. From Roundhouse you need to order:

1 Wheel set 24.5mm as Fowler tender for 32 gauge

Useful additional Roundhouse parts:

Spare safety valve (5/16"*32ME) (SV) with some extra 'O' rings as used inside the safety valve
Boiler blanking plug + 'O' ring (5/16"*32ME) (BLP), see general FAQs: how connect to a compressor for testing?
Pair of center buffers Roundhouse (CCBR), see general FAQs: how to couple LGB rolling stock?