Weisshorn boiler kit parts:

• Coal-fired boiler
• Turrit& pre-bent pipework with lubricator and blower nozzle
• Regulator & blower valve with R/C regulator arm & manual blower wheel
• Water gauge
• Ash pan with grate
• Fire box door
• Water top up pipework & SUPERIOR hand held bottle
• Intake tee and exhaust tee with nozzle
• Smoke box front, front cover, door, hinge, heat shield and beam
• Weisshorn boiler wrapper with 4 boiler bands
• Chimney with top and bottom
• All necessary O-rings, screws and nuts

Weisshorn chassis & body kit, chassis parts:

• Pre-bend left, mid and right cylindercover
• 6 Laser-cut ground floor parts with rivets
• 2 Laser-cut watertank bottom panels
• 2 Laser-cut frame plates with frame spacers
• 2 Connecting, coupling and eccentric laser-cut rods for Weisshorn
• Laser-cut boiler support
• Front and back lasercut buffer plates
• Laser-cut pony parts suitable for 32 and 45 mm gauge. If you want to run the Weisshorn on 32mm gauge you need to order a laser-cut pony axial plate 32 mm seperately.
• All necessary screws and nuts

Weisshorn chassis & body kit, body parts:

• Pre-bend left and right laser-cut side panels
• Laser-cut front panel
• Laser-cut internal back panel
• 2 Laser-cut watertank top plates
• 2 Watertank fill lids
• 4 Laser-cut windows
• 4 Handgrips Weisshorn
• Pre-bend laser-cut back panel
• Pre-bend laser-cut roof with laser-cut hinge
• Dome and sand-dome with pre-bend laser-cut bottom ring
• Riveting bar with aluminum plate
• All necessary rivets, screws and nuts

Weisshorn chassis & body kit, 6 lamps parts:

• 6 lamp bodies, sleeves, top caps, brackets, supports and front rings with windows
• A piece of silicone hose
• All necessary screws

Weisshorn manual parts kit:

• Manual regulator arm
• Manual damper support, shrink wrap and lever
• All necessary screws and nuts

Weisshorn R/C fittings kit:

• R/C regulator arm for blower
• Charger panel jack
• Slide switch
• Ribbon cable for the receiver
• Laser-cut servos support panel
• Laser-cut blower servo support panel
• Laser-cut batteries support panel
• Steel push rod adapted for Weisshorn with Quicklink connector
• All material to build the RC linkages for regulator, reverser, whistle & damper
• Shrink wrap, screws & nuts
• 4 "ever ready" rechargeable batteries with soldering leads

Return to building Weisshorn

© 2023 Riverdale Locomotives